Classic Running In Oil 30

Description

DESCRIPTION:
A SAE 30 mineral based running in oil for vintage and classic engines. This product is designed for the initial running in of re-built engines. Use of this product optimizes performance and fuel efficiency.

APPLICATION:
Use as received for initial running in of re-built engines. Formulated for running in on the road. Can be used for test bed running. Run engine at peak torque to ensure maximum bedding-in of piston rings. Drain and refill with the Millers Classic lubricant most suitable for the engine. Note: Do not use high performance oils before the bedding-in process is complete. Use in conjunction with an Assembly Lubricant. We recommend Millers Oils Assembly Lubricant – 7982. When rebuilding an engine use Assembly Lubricant on vital components such as cam lobes for protection on initial start-up & the dedicated Millers Oils running in oil per engine type e.g. Classic,
Automotive, Motorsport & Heavy Duty (HGV, Agricultural, Plant, Off Road).

USER BENEFITS:

• High quality mineral oil formulated to solve the problems experienced when reconditioned engines do not bed-in.
• Provides full protection to highly stressed valve gear/associated components whilst allowing piston rings to bed in against the bore.
• Suitable for 500 miles after which it should be replaced with the appropriate Millers Oils classic engine oil.
• Good running in will optimise the performance and fuel efficiency of a reconditioned engine.

PERFORMANCE PROFILE:
Designed to provide the performance of API SE/CC. Suitable for 500 miles road use. Very low leak down [4%] obtained after thorough running in process.